How we work in Baena: from first contact to installation

Ordering a made-to-measure wardrobe in Baena is a process with clear stages, and knowing them in advance takes away most of the uncertainty. Here we explain what happens from the moment you send us your first photos to the point where we go over the finished, installed wardrobe together, what you decide at each step and what information it helps to have to hand so that everything runs smoothly.

  1. 01Ballpark price
  2. 02Measuring
  3. 03Design
  4. 04Final quote
  5. 05Approval
  6. 06Manufacture
  7. 07Installation
  8. 08Final check

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

The eight stages of your order

  1. 01

    Guide price

    All we need is your address, a few photos, rough measurements and a description of what you want. We'll give you a guide price, subject to the measuring visit.

    By WhatsApp
  2. 02

    Measuring visit

    We'll suggest an appointment at your home in Baena to assess the space and the access routes to it. The fee is €50 if you don't commission the work with us, and it is waived entirely if you do.

    €50 if you don't order
  3. 03

    Design and plans, if needed

    Nothing is made without measuring up first: after that we prepare everything, and the terms agreed with you in Baena are set out in the proposal.

    Depends on the project
  4. 04

    Final quote

    Once the measurements are signed off, in Baena we draw up an itemised quote that sets out the interior layout, materials, hardware, installation and the total cost.

    In writing
  5. 05

    Approval and deposit

    If you are happy with the proposal and pay the agreed deposit, your order goes into production.

    Agreed deposit
  6. 06

    Manufacturing

    Once your design is approved, it goes to the workshop, where we build the units and get them ready to be transported and assembled in Baena.

    Usually 2–3 weeks from the moment the deposit is paid
  7. 07

    Installation

    The units travel to your home in Baena, where we assemble them and put right any detail on the doors, fronts and finishing touches.

    At your home
  8. 08

    Walk-through with you

    In Baena we inspect the finishes, test how everything works and opens, and note down any adjustments still outstanding in writing.

    In writing

Stage 01

What we need for an initial assessment

  • —Tell us what you need, whether it's a fitted wardrobe, sliding doors or a walk-in wardrobe, or that you haven't decided anything yet
  • —Neighbourhood or town
  • —Write the approximate size in cm: width, height and depth
  • —Photos of the empty corner from the front and from the sides
  • —Tell us what you usually store: coats and suits on hangers, folded T-shirts, shoes and suitcases
  • —Tell us which doors and finishes you have in mind, if you've already thought about it

No drawing or exact measurements needed.

Stage 02

What we check when we come to measure

  • —To avoid surprises with crooked walls or uneven ceilings, we measure the width and height of the space in more than one place
  • —Floor level and skirting board
  • —Switches, beams, sockets, radiators or windows
  • —Clear space in front of the wardrobe so it can be opened
  • —Before installation, we check the entrance hall, stairs and lift the pieces will be carried through

Stages 05–08

Approval and installation day

How approval works

In Baena, with the final measurements in hand, the interior layout, doors, materials and hardware are all settled, and the detailed quote reflects everything. You give the go-ahead, pay the deposit and the work moves into production.

What you prepare

In Baena we start from an empty room that can be moved around freely and whose floors and walls are finished. Any prior renovation work, such as relocating sockets or knocking down partition walls, is your responsibility and must be completed beforehand.

What we do

In Baena we close each project by going over it with you after installation and adjustments, and anything left unresolved is recorded in writing. Removal of the old wardrobe, if you ask for it, is included as a line item in the quote.

01

First, photos and measurements for a guide price

It all starts in the configurator or in the quote form. You give us the approximate width and height, the type of doors you have in mind and attach a photo of the space. With that information, the tool puts together a first design that goes to our team.

With those details, our team replies with a free price guide, normally within the next 24 hours. It is a first figure to help you see whether the project works for you, not a commitment on either side.

Phone on a tripod measuring up an empty bedroom with a tape measure, to plan a made-to-measure wardrobe in Baena

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

02

The measuring visit at your home in Baena

After the price guide comes the measuring visit. We take the real width, height and depth measurements, check that walls are plumb and corners square, and note sockets, radiators, skirting boards and any obstacles. This is the stage where questions are settled with the space right in front of you, whether you live in Baena itself or in one of the surrounding villages.

The measuring visit costs €50 if the wardrobe is not ordered in the end, and there is no charge when you go ahead with the project.

Have you already measured the space?

Message us on WhatsApp with a photo of the space and its approximate measurements, and we'll reply with some initial advice.

03

Design and agreeing the interior layout

  • 01

    With the final measurements, we draw up the proposal: the arrangement of the units, type of doors, hanging rails, shelves and drawers. If the project calls for it, we agree clearly what has changed from the first sketch.

  • 02

    This is the time to make adjustments at no manufacturing cost. Moving a shelf on the plan is instant; moving it once the wardrobe has been built is not.

04

The final quote and what it should include

The final quote is drawn up after measuring up. It should state the measurements, the materials for the doors and the interior, the type and number of doors, accessories, fittings and which installation work is included. If any of those lines is missing, ask for it: a clear quote is the best protection for both sides.

05

Approval, changes and deposit

Once you are happy with the design and the quote, they are approved in writing and we agree the deposit that starts manufacturing. From then on, any changes are assessed before going into production, because altering a board that has already been cut means making it again.

Made-to-measure four-door wardrobe lacquered in off-white with oak shelving and plans on the table in Baena
Measuring visit

If you live in Baena, request a measuring visit at your home

  • 01We only ask for your name and the town you live in.
  • 02Through that messaging channel we check your availability and agree the date.
  • 03In Benahavís, the measuring visit costs €50; if you commission your wardrobe with us, it's free.
06

Manufacturing time and installation appointment

Making the wardrobe takes between two and three weeks on average. Installation is arranged separately, according to your diary and access to your home in Baena or in whichever town you are in, and the date is confirmed once the wardrobe is ready.

07

Get your home ready to receive the wardrobe

Clear the space, remove anything that might be in the way and keep the route from the front door free. If you have a narrow staircase or a small lift, let us know so that we can bring the panels in the right size. Protect the floor along the route if it is delicate. In older homes in Baena with a narrow entrance hall or an interior courtyard, this is worth a phone call beforehand.

08

Baena: the final check of your furniture and how to report a problem

When the installation is finished, we go over the wardrobe with you: doors aligned, sliding doors that glide, drawers that close properly and clean finishing. If anything needs adjusting, it is noted there and then. The terms of each order are set out in the written proposal, and you can get in touch with us via contact if you have any questions afterwards.

Questions

What people in Baena usually ask us when thinking about a new wardrobe

Who is behind each project? Find out who we are at SI, ARMARIO.

Is the figure you give me at the start the final price?

No. It is a guide based on the details you provide. The firm price is set once the real measurements have been taken at your home.

Can I change something once the proposal has been approved?

If manufacturing has not started, we look at the change and update the proposal. Once it is in production, modifying parts may affect the lead time and cost.

When do I choose the colour of the doors and the order of the shelves and drawers in Baena?

After the measuring visit, when you receive the design and the quote. That approval is what allows manufacturing to begin.

What do we check with you once the wardrobe is installed?

Door alignment, how smoothly the sliding doors run, drawers closing properly, finishing details and a clean working area.

Shall we start with step one?

Send us a picture and three measurements via WhatsApp and we'll get your project in Baena under way. The photo can be a simple snapshot taken on your phone.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote