Made-to-measure wardrobes with bifold doors in Baena

A wardrobe with bifold doors opens up a wide section of the front, because the panels fold back on one another and stack to one side, like the pages of a book. In Baena we recommend this for anyone who wants to see and reach almost everything inside without panels crossing over each other, as they do with sliding doors. Here we explain how the system works, how much space it needs in front, and how to decide on the number of panels before you send us your configuration.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

How a bifold front folds away

Plan · example Floor plan · bifold
swing of a hinged door 28 cm open front 123
1Panels that fold concertina-style 2Track they run along 3Take up less room than a hinged door

Each set of bifold doors is made up of panels hinged together, which run along a top track and stack at the end of the wardrobe. When you open them, the panels stop covering the opening and gather into a narrow stack, so access to the inside is far wider than with a sliding door.

That is the big difference in everyday use: with bifold doors there is no panel in front of another hiding half the space. If your wardrobe has long hanging rails and continuous shelves, you can reach almost any point without shuffling from side to side. The stack of folded panels does take up a few centimetres at one end, and it is worth allowing for this at the design stage so it doesn't collide with a side panel or a wall.

01

When it is worth opening up a wide section of the front

Wardrobes with bifold doors work well when the thing that annoys you most is only seeing half of the inside. This is common in bedrooms where seasonal clothes take up a whole section and you want them in view when you swap over your wardrobe, or in hallways where you want to find your coat, bag and shoes in one go.

They also suit medium-width openings, between two and three metres, where hinged doors would be too long and sliding doors would only let you open one section. For very wide fronts, the usual approach is to split the front into two sets of bifold panels, each with its own stack, so that each half can be handled with one hand and without straining the track.

White fitted wardrobe with bifold doors open, showing wooden drawers and shelves, in a bright hallway in Baena
02

Space in front of and beside the panels

Bifold panels don't swing out like a bedroom door, but they aren't completely flat either: as they fold, the whole set moves a few centimetres forwards and slides sideways. That is why two things need measuring: the clear space in front of the wardrobe and the space at the side where the panels will stack.

If there is a chest of drawers, a bedside table or a radiator next to the wardrobe, the folded stack needs to end at a clear spot, not run into them. In the narrow corridors of a Baena home, this detail decides whether the system is viable: with the front folded back, the person opening the wardrobe needs room to stand in front of it without bumping into the bed. If that space isn't there, we will suggest a different type of opening rather than force bifold doors.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Number, width and weight of the panels

  • 01

    The number of panels isn't chosen for looks: each panel has a recommended maximum width and a weight that the track and hinges must carry without sagging. A very wide panel is easy to open but heavier and calls for reinforced fittings. Lots of narrow panels weigh less, though they add more visible joints and folds.

  • 02

    For a bifold-door wardrobe of around two metres, the usual combination is four narrow panels that fold back in two pairs. If the finish is mirror or glass, the weight goes up and we recommend making each panel narrower. The exact system is chosen once we know the width of the opening, the height to the ceiling and the panel material, and it is set out in the design before anything is made.

04

Compatibility with drawers and shelves

The inside of a wardrobe with bifold doors is easier to see and reach than with other systems, which makes it easier to fit shelves that make good use of the space. Internal drawers, however, need some calculation: when a drawer is pulled out, its front passes through the area where the panels fold. If the stack gathers right in front of it, the drawer can hit it.

To avoid this, we place the drawers in sections where the panels don't stack, or leave that area for shelves and rails. In a wardrobe with two sets of doors, one side can have drawers and the other hanging clothes. If you would prefer drawers over the full height, the sensible thing is to tell us from the start, because it changes the position of the tracks and may point to a different type of opening.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

Hardware, adjustments and maintenance

Bifold wardrobe doors have more moving parts than a simple sliding door: hinges between the panels, rollers that run along the track, a stop and an optional soft-close damper. All of this is checked during installation, and with proper adjustment the panels fold without catching on the floor or ceiling.

With use, the track for bifold panels collects dust and the hinges can loosen slightly. A simple clean of the track and the occasional tightening of the screws are enough to keep the movement smooth. It is worth choosing fittings designed for daily use and noting on the order if children are likely to tug at the panels, because that changes the type of handle and the reinforcement of the set.

White fitted wardrobe with bifold doors open, showing a light wood interior, in a hallway in Baena
Measuring visit

Ask us to come and measure up in Baena

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

How they differ from sliding and hinged doors

A sliding door is still the best option when there is almost no room in front of the wardrobe, but it leaves half the interior covered. A hinged door gives full access, though it needs the whole swing radius of each door. The bifold sits between the two: it opens wider than a sliding door and needs less clearance than a hinged one.

That is why a wardrobe with bifold doors makes the most sense when you have a medium amount of space and want a wide, clean front. If you are interested in the swing option, our page on wardrobes with hinged doors explains the radius and hinges in detail. What matters here is that the decision comes down to two figures: how much free space you have in front, and how much of the interior you need to see each time you open it.

07

What affects the price of a bifold front in Baena

  • 01

    A wardrobe with bifold doors usually costs more than a standard sliding one because of the amount of hardware and the precision of fitting it requires. Three factors weigh on the total: the number of panels, the panel material (lacquered, melamine, mirror or glass) and the type of track and damping.

  • 02

    Other details, such as handles, side finishing pieces or the height to the ceiling, also add to the cost. For a realistic idea, use the configurator with the measurements of your opening: you prepare the design and send it to us, and the team will give you a guide price within 24 hours. After that, the measuring visit costs €50 if you don't go ahead and is free if you order the wardrobe; manufacture usually takes 2 to 3 weeks.

Enquiry

Tell us about your project in Baena

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Baena

After installation: warranty and care for your wardrobe.

How far do the panels come out into the bedroom when they fold?

A little, yes, but much less than a hinged door. As they fold, the panels move a few centimetres forwards and stack at the side. That is why you need to keep that side clear, along with a reasonable walkway in front of the wardrobe.

How much of the interior is covered when the panels are folded back?

Almost none. Only the section where the stack of panels gathers stays hidden, which usually takes up between 15 and 25 cm at one end. If you would rather that end were a drawer or shoe area, we can put it there.

Can I put drawers inside a bifold wardrobe?

With care. Drawers need to sit in a section where the panels don't fold back, because the drawer front would hit them. If you want drawers along the whole front, a different system may suit you better.

What determines how many panels my front has?

The width of the opening, the weight of the material and the type of track. A wider front is divided into more panels or into two independent sets, so that each panel is easy to move and doesn't overload the fittings.

Can I order a bifold-door wardrobe that goes up to the ceiling?

Yes, as long as the track and the bifold panels are sized for that height. The taller it is, the heavier it gets, so it is usually combined with a separate top cupboard so as not to overload each panel.

How do I measure my opening before using the configurator?

Write down the width at three different heights, the height to the ceiling, and the free space in front and at the sides. With those figures the design starts from real data, and the proposal for your home in Baena will be more precise.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote