Baena: we design fitted wardrobes made to fit your home

A made-to-measure fitted wardrobe turns an awkward recess in your home into floor-to-ceiling storage, with no wasted corners and no unnecessary gaps. In Baena we plan it from what your wall actually measures, because no room is ever perfectly square. Here we go through when this solution is worth it, what gets measured, how the finishing details are handled and what affects the price, so you can send your request with the space properly described.

Fitted wardrobe · exampleElevation
actual width up to ceiling

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

01 — Before designing

Baena: a made-to-measure wardrobe that makes the most of every millimetre of your free space

In Baena, walls are rarely exact to the millimetre. We take the real measurements of the recess for the fitted wardrobe and finish off anything that doesn't line up with bespoke pieces.

  • Alcove
  • End of a corridor
  • Side of a bedroom
  • Under a beam

A piece that belongs to the space

In Baena you can make the most of an alcove or dress a whole wall right up to the ceiling; the trims are adjusted to the real floor, walls and ceiling, with no gaps.

The wall matters too

Before designing in Baena we check for damp, wall plumb, skirting boards and services. If the installation needs building work or electrical work, we'll explain it in the quote.

02 — Measurements

The measurements worth knowing

Your first quote will be based on simple approximate measurements. Measuring accurately is our job, and we do it at your home.

  1. The recess is measured across the width at three heights, marked as A1–A3
  2. H1–H2Each end has its own height; use the smaller value
  3. FAvailable depth
  4. !Note the position of switches, sockets, radiators and windows on the wall
skirting board socket A1 A2 A3 H1 H2
In Baena, take your measurements with the recess cleared. One photo from the front and another from the side, with the whole ceiling visible, will help you far more than coming up with a perfect figure.

03 — Finishing

Uneven walls, ceiling and skirting board

Walls

The wardrobe sits level

With cover strips or filler panels cut to size, the difference caused by a wall that isn't plumb in Baena stops being noticeable.

Ceiling

Right up to the top, no gap

With a full-height unit or a separate top cupboard. An adjustment piece covers any uneven ceiling.

Skirting board

Removed or worked around

Either the skirting board is removed or we work around it with an adapted one. In Baena we have it decided before we manufacture.

04 — Interior

How to organise the interior

We start from what you store, not from a standard module.

55–60 cm is the ideal depth for hangers to sit facing the front. Have less? Then we fit pull-out rails.
  • 01Hanging rails on two levels, when the height allows, for clothes of different lengths
  • 02Fixed or adjustable shelves
  • 03Interior drawers for accessories and underwear
  • 04Shoe rack, trouser rack or pull-out trays
  • 05Right at the top, a top cupboard for your suitcases, blankets and the clothes you keep for another time of year

05 — Doors

Which doors to choose

Hinged

+Everything stored inside is right in front of you with no effort.

−They need clear space in front to open.

Sliding

+They don't take up room space.

−Each time you use it, you only uncover one section of the space inside.

Both the look and the quote for your wardrobe in Baena depend on the door finish: melamine, lacquered, mirror, glass or a mix of them. For the interior, you can opt for something simpler.

07 — Price

What affects the price?

We start by giving you an indicative cost. You receive the final total in writing, and only then do we move on to manufacturing.

01

Measurements and finishing

Out-of-square walls, height up to the ceiling and top cupboard.

02

Doors

Doors, material and opening system.

03

Interior

Layout, drawers and fittings.

08 — Process

How your order progresses

Take a closer look at our process →
  1. 01A first ideaShare photos, measurements that don't need to be exact to the millimetre and your address, and we'll send you an indicative figure.
  2. Stage 02 · measuringWe measure the space where your wardrobe will goWe take readings of the ceiling, walls and skirting board at more than one point.
  3. 03If needed, we move on to the designWith the dimensions confirmed and the terms agreed in the proposal.
  4. 04Fixed priceThe agreed amount covers materials, fittings, interior, doors and installation, and comes with specific timescales.
  5. 05Acceptance and initial paymentOnce you've reviewed it and are happy, you pay the deposit we agreed.
  6. 06 · 2–3 wks.Workshop stageCarcass and pieces made to adapt it to the space.
  7. 07Final installation and fine-tuningWe make sure everything is level, that no gap shows next to the walls or ceiling and that every door closes precisely.
  8. 08Joint final checkWe go through every door and drawer with you. Any tasks still outstanding are documented.

What to prepare before installation

  • Empty, accessible recess
  • Floor and walls finished
  • Electrics sorted inside the recess
  • Access to the building entrance and lift

Limits of this solution

A wardrobe won't fix damp: it needs to be treated first.

Extras such as plasterboard, building work or electrical work in Baena are carried out only if your quote includes them.

With walls that are very out of plumb, the fitting pieces are wider and more visible.

01

When a fitted wardrobe makes sense

A fitted wardrobe really pays off when you have a free wall, an alcove or a space that is no longer good for anything else: the stretch between the door and the window, a corner of the hallway, the end of a narrow bedroom. Because it fills the full width of that space, there are no side gaps for dust to collect in, and by going up to the ceiling it adds a top cupboard without paying for a separate piece of furniture.

Compared with a freestanding piece, a made-to-measure fitted wardrobe makes use of a few centimetres that would otherwise be lost between the furniture and the wall. In a three-metre bedroom, that difference can mean one extra column of drawers.

It is not always the best option. If you plan to move soon or want to shift it to another room, a freestanding unit is more practical, because a fitted wardrobe is tailored to the specific walls of the home where it is installed.

White fitted wardrobe with six doors and wooden handles in a bedroom with exposed beams in Baena

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

02

Measuring the real space: width, height and depth in Baena

A recess is rarely a perfect box. To describe yours, measure the width at three heights (near the floor, at waist height and just below the ceiling), the height on the left, in the middle and on the right, and the depth at the top and at the bottom.

Note down the difference between those figures. If the width varies by 1 or 2 cm between floor and ceiling, that is normal in building work and is absorbed with an adjustment profile. If it varies by 5 cm or more, the wall is out of plumb and the design needs to spread that deviation into a visible finishing piece, so the doors hang straight even though the wall isn't.

Also note anything that interrupts the space: sockets, switches, a pipe, an access hatch or a ventilation duct. With that information, plus a few photos with the tape measure in view, the configurator prepares a first proposal for your fitted wardrobe.

Have you already measured the space?

Send us a photo of the space and the approximate dimensions by WhatsApp; you'll get a first idea back with no obligation.

03

Walls, skirting boards and finishes up to the ceiling

  • 01

    Where the wardrobe meets the wall decides the final look. A well-finished fitted wardrobe looks like part of the building, not a piece of furniture added afterwards.

  • 02

    The skirting board is the first issue: either it is cut away and the wardrobe fitted right up to the wall, or it is left in place and the wardrobe gets a recessed plinth to work around it. Each option affects the usable depth, so it is worth deciding before manufacture.

  • 03

    The ceiling is the second. If the slab is uneven, a margin is left and covered with a pelmet, a light piece that follows the line of the ceiling and hides the irregular gap. Where the recess has no side walls, they are dealt with using the wardrobe's own side panels and a filler strip that closes the joint against the wall.

  • 04

    These decisions are made from measurements and photos, not by eye, which is why they need checking before installation.

04

Doors and access to the interior

The type of door makes a big difference to how a fitted wardrobe is used. Hinged doors give full access, but need clear space in front for the swing: around 50 cm per door. Sliding doors take up no floor space, although at any moment they cover part of the interior. Bifold doors open up more of the wardrobe than a sliding door, with less swing than a hinged one.

For a narrow hallway in Baena, sliding doors are usually the most comfortable choice. In a bedroom with space in front, hinged doors let you see all your clothes at once. In a Baena home with wide recesses, you can combine them: hinged doors in the centre and sliding doors at the ends.

Think too about how you move around the room while the door is open. A 60 cm door that hits the bed is a daily nuisance, and you can spot it before ordering simply by measuring from the door to the furniture.

05

Layout for clothes, drawers and top cupboard

A floor-to-ceiling fitted wardrobe gives you around 240 cm of height, divided into zones. At the bottom, the heavy items and the things you use most: shoes, drawers and stacks of clothes. At mid-height, the hanging rails. At the top, a cupboard for suitcases and seasonal boxes.

If the space is two metres wide or more, the best layout usually alternates columns: one for long hanging clothes with nothing underneath, one with a double rail for shirts and trousers, and a third with drawers and shelves. Each column is calculated for the width it has, so the shelves don't sag and the drawers have enough runners.

In deep fitted wardrobes, the minimum depth for hanging clothes is around 55 cm. If there is more, you can make use of it with pull-out rails or a second row of shelves at the back, reached through an inner door.

Oak fitted wardrobe with open doors, drawers and hanging clothes in a bright bedroom in Baena
Measuring visit

Ask us to come and measure up in Baena

  • 01You leave us your name and your area.
  • 02We send you our proposal within a day by WhatsApp and, once you approve it, it's confirmed in Baena.
  • 03There is a €50 charge for the measuring visit, but we cover it if you commission the project from us.
06

What to check before installation

Before the pieces arrive, the space should be ready. That means the wall finished and painted, the final flooring laid, the electrical work completed and any wet work fully dried.

You also need to check that the pieces can get into your home in Baena, through the front door and up the stairwell or in the lift. The sides of a floor-to-ceiling wardrobe are 240 cm or more; if the route is tight, they are made in several sections and assembled inside.

Manufacturing usually takes 2 to 3 weeks on average and the installation is agreed separately, so there is time to finish any outstanding work in the room.

07

Factors that affect the final cost of a fitted wardrobe in Baena

  • 01

    Several factors affect the cost of a made-to-measure fitted wardrobe. The first is size: more metres of frontage means more material. The second is the doors: sliding doors with quality profiles and bearings cost more than simple hinged ones. The third is the interior: every full-extension drawer and every pull-out accessory adds to the price.

  • 02

    The finish also matters, as do any pelmets and fillers needed to reach the ceiling and special pieces for uneven surfaces. If an old wardrobe has to be removed or the building work adjusted, those jobs are priced separately.

  • 03

    With your configuration and measurements, the SI, ARMARIO team gives you a guide price within 24 hours, and the final quote is written after the measuring visit at your home. The measuring visit costs €50 if you end up not placing an order, and is free if you go ahead.

08

Limits of the space and alternatives

Some spaces don't suit a comfortable fitted wardrobe. An alcove less than 45 cm deep is barely good for hanging clothes; a space with a radiator, a roller-shutter box or a column in the middle means giving up some room.

In those cases there are alternatives. A shallow wardrobe with front-facing hanging rails; a front with an open section for the radiator; a drawer unit on one side and a rail on the other. If the wall has a major irregularity, a freestanding unit running wall to wall can give you the same storage with less building work.

Tell us what limits your space in Baena and we'll tell you what can be made the most of and what is worth changing.

09 — Enquiry

Tell us what you want to achieve with your fitted wardrobe in Baena

  1. 1We read your message and look at your photos.
  2. 2In Baena, our reply to your WhatsApp includes an initial approximate figure.
  3. 3Once we've measured up in Baena, we prepare your final quote. If you don't place the order, the measuring visit costs €50, while if you do it's completely free.

Until you approve the design and the price, the boards stay uncut; that's how we work in Baena too.

Your fitted wardrobe

2 MIN

You'll have a WhatsApp message already written by us. Take a look, change anything you don't like and send it with your photos attached in the chat.

10 — Questions

Questions about fitted wardrobes

After installation, your wardrobe stays with us: warranty and cleaning and usage recommendations.

My wall is crooked – can I still order a fitted wardrobe?

Yes. The fitted wardrobe is made to the real measurements and any deviation is absorbed with adjustment profiles and fillers at the sides. If the wall is badly out of true, the design spreads the difference so the doors hang straight.

Does building work need to be done before installation?

Normally not. It is fitted onto your existing floor and walls. Work is only needed if a socket has to be moved, a very thick skirting board removed or a badly out-of-plumb wall corrected, and that is assessed before the final quote.

Is it worth taking the wardrobe up to the ceiling with a top cupboard?

Yes. A wardrobe that goes up to the ceiling adds high-level storage for suitcases and seasonal clothes. Differences in height are finished off with a pelmet, and the top cupboard usually has shorter doors so they are easy to handle.

If I already have an old wardrobe, can any parts be reused?

Sometimes. If the carcass is sound and only the interior or the doors are failing, we can look at keeping the structure. If the space has damp or the unit is warped, a new one is usually the better option.

How deep does a fitted wardrobe need to be for hanging clothes?

About 55 cm of usable depth with the hangers on. If the space is shallower, it is solved with rotating rails or an area of shelves and drawers instead of hanging.

What photos and measurements should I send?

One photo straight on to the space, one of the ceiling and one of the floor, with the tape measure in view, plus the three measurements of width, height and depth. With that, the proposal is prepared from the configurator.

Got a space you're not making the most of?

From Baena you can speed things up like this: a photo of the front of the space, the width measured at the top and at the bottom, and send it by WhatsApp. The measuring visit costs €50 if the order doesn't go ahead, and is free when we do carry it out.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote