Care and adjustments for your made-to-measure wardrobe in Baena
A well-fitted wardrobe stays in good condition with a few simple habits: cleaning it with the right product, keeping an eye on the fittings and letting us know promptly if anything needs adjusting. This page gathers care tips for your made-to-measure wardrobe in Baena, depending on the finish of the doors and the type of door, and explains what details to send us when something needs checking. The terms that apply to each order are set out in the written quote you receive.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
Keep your project documents
Keep the approved quote, the design with the measurements, and the details of the finish and fittings you chose. With these to hand, any later query is resolved faster, because the wardrobe can be identified without any doubt.
The specific terms of your order are set out in the written proposal for each project. Read them carefully when you approve it and keep them with the rest of your household paperwork.

Cleaning according to the finish
A lacquered or laminated door is cleaned with a soft, damp cloth and then dried. Avoid scouring pads and abrasive products, which scratch the surface. On matt finishes, fingerprints can be removed with a neutral cleaner.
If the doors have a mirror or glass panel, use a glass cleaner without too much ammonia and don't spray it right up against the edges, where the liquid can seep in.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Hardware, runners and hinges
- 01
Sliding doors glide better when the runners are clean. Run the vacuum cleaner along the track from time to time to remove built-up dust. Hinges can work loose with use: if a door rubs or hangs out of line, it's best to adjust it soon, before the misalignment damages the edge.
- 02
Don't force a door that sticks. First check whether something has found its way into the runner.
Humidity, sun and heat
A wardrobe copes better with everyday use if it is kept away from constant damp. In Baena, with very hot summers and intense sun, it's worth protecting any doors that get direct sunlight for hours at a time, because the colour can fade over time. A curtain or a blind will reduce this effect.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
How to report an adjustment that is needed
If you notice a door that's out of square, a drawer that won't close properly or a loose trim, get in touch with us via contact as soon as possible. The sooner we hear about it, the easier it is to put right. Tell us whether the problem is new or has appeared with use, and whether it happens every time or only in certain situations, for example when closing it firmly or with a lot of weight inside.

Ask us to come and measure up in Baena
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
What to send when you ask for help
Tell us your name, the address of the property and a short description of the problem. Attach one general photo of the wardrobe and a close-up of the affected area. If you remember the finish or the type of door, make a note of it. There's no need to share any personal details beyond what we need to locate your project.
Questions
Frequently asked questions about wardrobes in Baena
Who do I send an issue to?
Get in touch through the contact channels, telling us which project it is. We'll reply with the next steps.
What photos help to identify an adjustment?
An overall view of the wardrobe and a close-up of the affected area, in good light.
Where can I find the terms of my project?
In the written quote you received. If you can't find it, ask us for a copy.
How do I know which cleaning product to use?
For most finishes, a damp cloth and neutral soap are enough. Avoid abrasives and solvents.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

